Nikon sora switch on: Difference between revisions
Jump to navigation
Jump to search
added required/optional elements |
No edit summary |
||
| Line 2: | Line 2: | ||
=== Required elements: === | === Required elements: === | ||
''' | 1) '''Controller''': powers the microscope stand | ||
''' | 2) '''Temp. incubation''' - even if you don't need temp incubation; switch off the heater using its button on this box | ||
''' | 5) '''Laser box''' - you need lasers to image | ||
''' | 7) '''Cam 1''' - you need at least 1 camera to image | ||
''' | 9) '''SoRa unit''' - this is required for confocal imaging | ||
=== Optional elements: === | === Optional elements: === | ||
''' | 3) '''Humidity + CO2''' - only when live-cell imaging samples that require this controlled - make sure to add water to the incubator | ||
''' | 4) '''FRAP scanner''' - only when intending to do [[wikipedia:Fluorescence_recovery_after_photobleaching|FRAP]] (fluorescence recovery after photobleaching) experiments | ||
''' | 6) '''FRAP interlock -''' only when intending to do FRAP experiments | ||
''' | 8) '''Cam 2''' - only when intending to do simultaneous 2-color imaging experiments | ||
Revision as of 07:51, 28 July 2025
Required elements:
1) Controller: powers the microscope stand
2) Temp. incubation - even if you don't need temp incubation; switch off the heater using its button on this box
5) Laser box - you need lasers to image
7) Cam 1 - you need at least 1 camera to image
9) SoRa unit - this is required for confocal imaging
Optional elements:
3) Humidity + CO2 - only when live-cell imaging samples that require this controlled - make sure to add water to the incubator
4) FRAP scanner - only when intending to do FRAP (fluorescence recovery after photobleaching) experiments
6) FRAP interlock - only when intending to do FRAP experiments
8) Cam 2 - only when intending to do simultaneous 2-color imaging experiments