Nikon sora superresolution switch: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 1: | Line 1: | ||
# Use the '''100x / 1.49 oil''' objective | How to switch from normal mode | ||
# | # Use the '''100x / 1.49 oil''' objective (is the highest numerical aperture lens available) | ||
# Set camera to "'''binning 1x1'''" (no binning) | # Switch to the '''SoRa spinning disc''' under "pinhole" | ||
# Switch to the '''2.8x SoRa magnifier''' | |||
# Set the camera to "'''binning 1x1'''" (no binning) | |||
# '''Obtain a Z-stack''': Make the stack slightly "too big" - having some extra blurry layers above/below the structure helps with deconvolution afterwards. | # '''Obtain a Z-stack''': Make the stack slightly "too big" - having some extra blurry layers above/below the structure helps with deconvolution afterwards. | ||
# Perform "'''3D Deconvolution'''" (software command) with the standard suggestged settings (mostly change "noisyness" of the picture when needed) | # Perform "'''3D Deconvolution'''" (software command) with the standard suggestged settings (mostly change "noisyness" of the picture when needed) | ||
# '''Evaluate''' result and adjust parameters where necessary (e.g. adjust Z-step size, adjust image "noisyness" setting upon deconvolution) | # '''Evaluate''' result and adjust parameters where necessary (e.g. adjust Z-step size, adjust image "noisyness" setting upon deconvolution) | ||
Revision as of 13:53, 4 July 2025
How to switch from normal mode
- Use the 100x / 1.49 oil objective (is the highest numerical aperture lens available)
- Switch to the SoRa spinning disc under "pinhole"
- Switch to the 2.8x SoRa magnifier
- Set the camera to "binning 1x1" (no binning)
- Obtain a Z-stack: Make the stack slightly "too big" - having some extra blurry layers above/below the structure helps with deconvolution afterwards.
- Perform "3D Deconvolution" (software command) with the standard suggestged settings (mostly change "noisyness" of the picture when needed)
- Evaluate result and adjust parameters where necessary (e.g. adjust Z-step size, adjust image "noisyness" setting upon deconvolution)